Interroll RollerDrive EC200 - Transport and storage; Transport; Storage

17
Version 1.0 (11/2007) en
Original language
RollerDrive EC200
Transport and storage
Transport and storage
Transport
• Each RollerDrive is covered at its ends with end-protectors.
¾ Do not stack pallets.
¾ Check the fixation of the RollerDrives before transport.
¾ Avoid hard shocks during transport.
¾ Check each RollerDrive visually for damage after transport.
¾ In case of damage, take photos of the damaged parts.
¾ To maintain the warranty, report any damage caused by transport instantly to
the transport company and Interroll.
¾ Do not transfer the RollerDrives between warm and cold environments. This
may cause condensing water.
Storage
¾ Check each RollerDrive for damage after storage.
Risk of injury due to improper transport
¾ Transport may only be carried out by qualified and
authorized persons.
¾ Observe the following notices.
CAUTION
Risk of injury due to improper storage
¾ Do not stack pallets.
¾ Do not stack more than four carton boxes.
CAUTION
Hint
With IP66 RollerDrives, due to the sealing, condensing water inside the
RollerDrive may cause corrosion.