2
Version 1.0 (11/2007) en
Original language
Introduction
RollerDrive EC200
Introduction
Handling of the user manual
Content of the manual This manual contains important advice, notes and information about the
RollerDrive EC200 in all phases of its lifecycle:
• Transport, assembly and commissioning
• Safe operation, maintenance and troubleshooting, disposal
• Accessories
Validity of the manual The manual describes the RollerDrive EC200 as it is delivered by Interroll.
Special application designs require validation from Interroll and additional
technical instructions.
The manual is part of the
product
¾ For trouble-free, safe operation and warranty claims, read the manual and
follow the instructions before handling the RollerDrive EC200.
¾ Keep the manual near to the RollerDrive EC200.
¾ Pass the manual on to any subsequent operator or occupant of the
RollerDrive EC200.
¾ Interroll does not accept any liability for malfunctions or defects due to non-
observance of this manual.
¾ If you have any questions after reading the user manual, feel free to contact
our customer service. See the last page for contact information.
Warning notices in this manual
The warning notices in this document refer to risks which may arise during
usage of the RollerDrive EC200. For relevant warning notices, see "Safety",
page 4 and the warning notices at the beginning of each chapter.
There are three categories of danger. The following signal words are used in the
document as required:
•Danger
• Warning
•Caution
Structure of warning notices
Signal word Meaning
Danger Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Warning Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Caution Indicates a hazardous situation which, if not
avoided, may result in minor or moderate injury.
Nature and source of the hazard
Possible consequence of non-observance
¾ Information about how to avoid the hazard.
DANGER
To Next Page
Loading...
Need help?
General
