Invacare CS3 - Page 31

6 SET-UP
Part No 1153410
31 Invacare ®CS Series Beds
6. Cut the untrimmed or green plastic tie holding
the knee-foot panel to the frame.
7. Cut the untrimmed or green tie holding the
mattress keepers on either side of the bed.
8. Cut the untrimmed or green ties holding the
mattress keepers at the end of the bed.
9. Carefully cut the untrimmed or green tie holding
the pendant bundle.
10. Carefully cut the untrimmed or green tie holding
the mains cable bundle.
11. Plug power cord into a properly grounded
outlet.