9 MAINTENANCE
Part No 1153410
63 Invacare ®CS Series Beds
9 Maintenance
9.1 Cleaning Instructions
1. Unplug product before washing.
2. Make sure all electrical parts (motors, control box and pendant) are not damaged and that all connection ports are plugged. DO NOT allow
liquids to enter electrical components.
3. Disinfect and wash all components. DO NOT submerge the bed frame or electrical parts.
4. DO NOT power wash or steam-clean. Use household water pressure only.
5. Rinse thoroughly with water (maximum temperature 110°F or 43°C). DO NOT use solvents, bleach, alcohol, petroleum products, caustic
agents, or highly alkaline or acidic agents to clean the bed.
6. Retract each actuator to the minimum stroke length before washing to avoid degreasing the piston rod.
7. Dry all components before storing.
CAUTION
Equipment or property DAMAGE or resident INJURY may occur during maintenance.
To Next Page
Loading...
