Invacare Robin Service Manual (English)

Other manuals for Invacare Robin

Service Manual228 pages

User Manual32 pages

Manual2 pages

Questions and Answers:

C
coxdavidSep 5, 2025
Why Invacare Medical Equipment ceiling hoist does not respond to any buttons?
- Z
  zharrisSep 5, 2025
  If the Invacare Medical Equipment ceiling hoist does not respond to the hand control’s buttons and the up/down buttons on the ceiling hoist are also not responding, it could be due to several reasons. First, check if the emergency stop is activated and reset it if necessary. Second, ensure that the system has power or the battery is adequately charged. If not, charge the battery or use an emergency battery. Lastly, the fuse might be blown, requiring replacement by contacting an Invacare representative or specialized dealer.
C
colebobbySep 4, 2025
What to do if Invacare Medical Equipment ceiling hoist responds to up/down buttons but not hand control?
- M
  mandygarzaSep 4, 2025
  If the Invacare Medical Equipment ceiling hoist does not respond to the hand control buttons, but the up/down buttons on the ceiling hoist are working, the hand control might not be connected properly. Check the hand control plug to ensure it is properly inserted. Alternatively, the hand control itself may be defective and require replacement.
J
Jessica RichardsonAug 23, 2025
What to do if Invacare Lifting Systems hoist is not responding?
- R
  Raymond JoyceAug 23, 2025
  If your Invacare Lifting Systems hoist isn't responding to the hand control or the up/down buttons on the hoist, first check if the emergency stop is activated and, if so, depress the emergency stop button. Next, verify that the battery isn't discharged; if it is, put the hoist on charge or use the emergency battery. Finally, inspect the fuse and replace it if it's blown.
D
Danielle PhillipsSep 2, 2025
What to do if Invacare Robin lifting straps will only move up?
- N
  Nicholas WilliamsSep 2, 2025
  If the lifting straps on your Invacare Medical Equipment only move up and not down, the hand control may be defective and needs replacement. It is also possible that the loose strap function has been activated, in which case you should contact an Invacare representative or specialized dealer for service.
J
Jose RhodesSep 1, 2025
What to do if Invacare Robin Medical Equipment lifting straps will only move down?
- G
  Gabriel RobinsonSep 1, 2025
  If the lifting straps on your Invacare Medical Equipment only move down and not up, it could be due to a nearly discharged battery. Try charging the battery or using an emergency battery. Another possibility is that the load is too high, as the hoist has an over-current safety system. Try reducing the load.
J
Joseph CainAug 31, 2025
Why Invacare Robin ceiling hoist does not respond to hand control buttons?
- L
  ledwardsAug 31, 2025
  If your Invacare Medical Equipment ceiling hoist isn't responding to the hand control buttons and the up/down buttons on the ceiling hoist are also not responding, it could be due to several reasons. First, check if the emergency stop is activated and reset it. Second, ensure the system has power and the battery is charged, using the emergency battery if necessary. Finally, a blown fuse could also be the cause, in which case you should contact an Invacare representative or specialized dealer for service.
A
Andrew WatersAug 30, 2025
What to do if Invacare Medical Equipment ceiling hoist does not respond to hand control buttons?
- R
  Ryan HardinAug 30, 2025
  If your Invacare Medical Equipment ceiling hoist isn't responding to the hand control buttons, but the up/down buttons on the ceiling hoist itself are working, the issue might be with the hand control connection. Ensure the hand control plug is properly inserted. If the problem persists, the hand control may be defective and needs replacement.
J
Jonathan BlackwellAug 29, 2025
Why is my Invacare Lifting Systems hoist so noisy?
- H
  hannahellisonAug 29, 2025
  If your Invacare Lifting Systems hoist emits excessive noise when activated, it may be due to defect bearings, gearwheels, or the motor. Replace the hoist.
G
Grace WarnerAug 28, 2025
How to untwist Invacare Lifting Systems hoist straps?
- T
  Tracie HughesAug 28, 2025
  If the lifting straps on your Invacare Lifting Systems are twisted and won't straighten out, it could be because the lifting hooks aren't turning freely enough. Try cleaning or replacing the hooks. Alternatively, the straps might be frayed and need replacement.
D
Dr. Haley MasonAug 27, 2025
How to fix constant speed on Invacare Lifting Systems hoist?
- K
  Kathleen BaileyAug 27, 2025
  If your Invacare Lifting Systems hoist speed remains the same regardless of the load, the non-load quick movement function might be permanently activated. Check the quick movement switch.