Why do Invacare Lifting Systems straps only move upwards?
If the Invacare Lifting Systems hoist straps only move upwards, the hand control might be defective and require replacement. Also, check if the loose strap function is activated and, if so, check the loose strap switch.
What to do if Invacare Lifting Systems hoist hand control is not responding?
If your Invacare Lifting Systems hoist is not responding correctly to the hand control buttons, but the up/down buttons on the hoist are working, make sure the hand control is securely plugged in. If it is, the hand control may be defective and need to be replaced.
Why do Invacare Lifting Systems straps only move downwards?
If your Invacare Lifting Systems hoist straps only move downwards, it could be due to a nearly discharged battery. Try putting the hoist on charge or using the emergency battery. Alternatively, the load might be too high; reduce the load, as the hoist has an over-current safety system. Also, check the hand control, its connection, and the re-entering endstop.
General| Brand | Invacare |
|---|---|
| Model | Robin |
| Category | Medical Equipment |
| Language | English |
To Next Page
