Need help?Do you have a question about the Invacare Solara 3G and is the answer not in the manual?
General| Drive System | Manual |
|---|---|
| Weight Capacity | 300 lbs |
| Tilt Angle | 0° to 45° |
| Tires | Pneumatic or solid |
| Seat Width | 16", 18", 20" |
Explains warning symbols and signal words used in the manual for hazard identification.
Defines the intended users and purpose of the Invacare Solara 3G and Spree 3G wheelchairs.
Outlines the terms, conditions, and limitations of the product warranty provided by Invacare.
Identifies the location of important labels on the wheelchair, including serial and patent information.
Illustrates and names the main parts and components of the wheelchair for user familiarization.
Details the technical dimensions, weight, and capabilities of the Solara 3G and Spree 3G models.
Provides essential safety precautions and instructions for the initial setup and use of the wheelchair.
Lists components considered normal wear and tear, and clarifies warranty coverage for these parts.
Covers critical safety aspects and techniques for safe operation, maneuvering, and handling of the wheelchair.
Offers guidelines and safety precautions for safely transferring the user into and out of the wheelchair.
Step-by-step instructions for attaching and detaching the footrest assemblies to the wheelchair frame.
Explains the procedure for adjusting the height of the elevating legrest assembly for user comfort.
Details how to install protective impact guards and calf straps onto the footrest frame.
Guides users on how to install and remove dual point armrests and adjust their height.
Provides instructions for detaching, attaching, and using the flipback armrest feature.
Explains the process for installing and removing T-arm style armrests onto the wheelchair.
Describes how to properly engage and use the locking mechanism of cantilever armrests.
Details the operation and adjustment of non-locking cantilever armrests.
Instructs on the correct engagement and disengagement of the wheelchair's wheel lock system.
Explains the different methods for engaging and disengaging the hublock system for securing the wheelchair.
Guides on how to correctly install and adjust the anti-tipper devices for enhanced safety.
Explains how to adjust the angle of the stroller handles for optimal user or attendant comfort.
Provides instructions on how to fold and unfold the back assembly of the wheelchair for storage or transport.
Details the safe operation of the recliner function, including adjustments and precautions.
Explains the procedure and safety considerations for using the tilt-in-space mechanism.
Provides instructions for the quick-release mechanism used to install and remove the rear wheels.
Describes the features and purpose of the wheelchair's transport-ready package.
Details the wheelchair's compliance with relevant safety standards for vehicle transport.
Provides specific details related to the transport-ready option's compatibility and weight limits.
Crucial instructions on how to properly secure the wheelchair for safe transport in a vehicle.
Guides on how to properly use seat belts and restraints to secure the occupant during vehicle transport.
Provides comprehensive checklists for initial setup, weekly, monthly, and periodic inspections of the wheelchair.
Explains how to adjust the height of the footrest assembly for optimal leg support.
Details the installation process for the adjustable angle flip-up footplate hinge.
Guides on how to adjust the depth and angle of the flip-up footplates for user comfort.
Provides instructions for adjusting the position of the elevating legrest assembly.
Covers adjustments for footplate height and calfpad position for proper leg support.
Instructions for replacing the heel loop component on composite or articulating footplates.
Details the procedure for replacing the bolt-on sector block part.
Details the procedure for replacing the clamp-on sector block part.
Instructions for removing and installing new armrest pads on conventional armrests.
Guides on how to adjust the height of T-arm style armrests for user comfort.
Explains how to adjust the T-arm sockets to ensure a secure and proper fit.
Details how to adjust transfer assists and side guards for T-arms.
Provides instructions for installing the locking cantilever arm assembly.
Guides on how to adjust the height of the locking cantilever arms.
Details the installation and adjustment procedures for non-locking cantilever arms.
Instructions for replacing armrest pads specifically for cantilever arms.
Explains how to adjust the height of the back canes for optimal back support.
Guides on how to adjust the back angle of the wheelchair for different user positions.
Instructions for installing and removing the non-adjustable stroller handles.
Details how to adjust the angle of the stroller handles for user or attendant convenience.
Provides instructions for installing and replacing seat positioning straps for added security.
Guides on how to install and replace chest positioning straps for user support.
Explains how to install and remove the main seating system of the wheelchair.
Details how to adjust the trigger release cables for the tilt-in-space mechanism.
Provides instructions for adjusting the cables that control the hublock system.
Guides on how to position the tilt locking collars to control the wheelchair's tilt function.
Explains how to adjust the height of the vent tray for proper positioning.
Provides instructions for installing and removing the rear wheels using quick-release or permanent axles.
Explains how to adjust the overall seat-to-floor height of the wheelchair.
Guides on how to properly adjust the caster forks to prevent flutter and ensure smooth steering.
Details how to adjust the wheel locks for proper engagement and braking.
Instructions for removing and installing new upholstery for the backrest and headrest.
Guides on adjusting the angle of the contracture foot assembly for optimal positioning.
Explains how to adjust the side-to-side angle of the bilateral contracture footplates.
Details how to adjust the front-to-back angle of the contracture footplates.
Provides instructions for adjusting the depth of the contracture footplates.
Guides on adjusting the height of the contracture footplates for proper leg support.
Explains how to adjust the width of the contracture foot assembly.
Contains general disclosures and legal information related to the RESNA test data.
To Next Page
