Invacare Solara 3G - Set up Inspection Checklists

9 SERVICE
Part No 1154295 81 Invacare® Solara®3G/Spree 3G Wheelchair
9.1 Set up Inspection Checklists
Initial adjustments should be made to suit your personal body structure needs and preference.
❑ Ensure wheelchair rolls straight (no excessive drag or pull to one
side).
❑ Inspect clothing guards for bent or protruding metal.
❑ Ensure that all fasteners on clothing guards are secure.
❑ Ensure arms are secure but easy to release and adjustment levers
engage properly.
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure armrest upholstery has no rips.
❑ Ensure armrest pad sits flush against arm tube.
❑ Ensure hand grips are not loose.
❑ Ensure seat, back and/or arm upholstery have no rips.
❑ Ensure trigger release lever cables and handles return when
released.
❑ Inspect handrims for signs of rough edges or peeling finish.
❑ Ensure there is no excessive side movement or binding when drive
wheels are lifted and spun.
❑ Ensure sealed bearings and axle nut tension are correct.
❑ Adjust bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel/fork assembly has proper tension when caster is
spun. Caster should come to a gradual stop.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds
to a stop.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Ensure that casters are free of debris.
❑ Ensure wheel locks DO NOT interfere with tires when rolling.
❑ Ensure wheel lock pivot points are free of wear and looseness.
❑ Ensure wheel locks are easy to engage.
❑ Inspect tires for flat spots and wear.
❑ Check pneumatic tires for proper inflation.
❑ Check that all labels are present and legible. Replace if necessary.

TOOLS: Performing procedures in this section may require the use of tools including:
Flat blade and philips head screwdrivers, standard and or metric socket set/wrenches, torque wrench, hex (Allen) keys and
side cutters.