8 SAFETY INSPECTION/MAINTENANCE
Invacare® Solara®3G/Spree 3G Wheelchair 76 Part No 1154295
8.2 Troubleshooting - Mechanical
8.3 Maintenance Safety Precautions
8.4 Suggested Maintenance Procedures
1. Before using your wheelchair, make sure all nuts and bolts are tight.
2. Check all parts for damage or wear and replace.
CHAIR VEERS
LEFT/RIGHT
SLUGGISH
TURN/
PERFORMANCE
CASTERS
FLUTTER
SQUEAKS
AND
RATTLES
LOOSENESS
IN CHAIR
SOLUTIONS
XX
If pneumatic tires, check for correct and equal pressure.
X XXX
Check for loose stem nuts/bolts.
XX
Check that casters contact ground at the same time.
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may result.
Replace any labels that are missing, worn, or torn. Refer to Label Locations
on page 10 for a listing of the labels and their
locations
CAUTION
DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame tubing.
To Next Page
Loading...
