Invacare Solara 3G - Adjusting the Anti-Tippers

6 ADJUSTMENT
Invacare® Solara®3G/Spree 3G Wheelchair 70 Part No 1154295
6.3 Adjusting the Anti-Tippers
1. Depress the release button on the wheeled portion of the anti-tipper and slide it up/down to achieve 1
1
/
2
to 2
1
/
4
inch clearance.
2. Ensure that the release buttons are fully engaged in the adjustment holes and 1
1
/
2
to 2
1
/
4
inch clearance is maintained.
3. If a 1
1
/
2
to 2
1
/
4
inch clearance cannot be obtained, contact a qualified technician.
4. Repeat STEPS 1-3 for opposite side.
FIGURE3 Adjusting the Anti-Tippers

WARNING
Anti-tippers MUST be fully engaged and release buttons fully protruding out of same respective adjustment holes BEFORE
use. This will avoid a 3-Wheeling situation..
Release Button
Anti-tipper
Locking
Button
Wheelchair Frame
Release Button
Anti-tipper
(Wheeled Portion)