The procedure for installing the Timpani tympanometer is simple, but
requires careful attention. If the installation is not performed correctly, the
system could be affected by safety problems when in use.
This chapter describes the parts supplied, and the procedure for installing
the system.
OPENING THE PACK AND INSPECTING THE CONTENTS
On taking receipt of the pack, make certain that the box is not damaged.
Check that all parts contained in the box are free of damage or defects.
Having made the various connections, carry out a further visual inspection
before switching on, to check for possible damage.
Should the instrument or any of its parts or accessories appear to be
damaged or defective, contact the dealer or Inventis service.
Keep the packaging materials, in case the instrument should need
to be sent to the dealer or to Inventis for any reason.
To Next Page
Loading...
Need help?
General
