The Timpani tympanometer can be interfaced with a personal computer.
The Maestro software suite must be installed on the computer (with or
without proprietary database, or as a Noah module). Refer to Maestro User
Manual – General Functionalities for a detailed description of the
procedures involved when installing Maestro on the computer, and to
Maestro User Manual – Impedance Audiometry functionalities for more
information on using the Timpani tympanometer in conjunction with a
computer.
CONNECTION TO PC
The Timpani tympanometer is connected to a USB port of the computer
using the cable provided (conventional USB cable with A / mini B
connectors) or plugged into the charging base (which in turn is connected to
the computer via USB).
No special drivers are required for installation purposes: a few seconds after
plugging in, the tympanometer or the charging base will be recognized by
the operating system, which installs the requisite drivers automatically. The
installation is complete when the following message appears at the bottom
right of the screen:
The Timpani tympanometer and the charging base are compatible with
computers using a Microsoft Windows 32 or 64 bit operating system,
version Windows 7 or later.
To Next Page
Loading...
Need help?
General
