The Timpani tympanometer does not require any special periodic
maintenance other than calibration and normal cleaning, both of which are
described in this chapter.
The performance and safety of the instrument will be assured as long as the
recommendations for care and maintenance indicated here are correctly
observed.
The instrument must be switched off before commencing any kind of
cleaning operation.
Apart from replacing the battery, the inspection and servicing of
internal components must be left entirely to technicians approved
by Inventis srl.
Transducers are manufactured utilizing ultra-fragile diaphragms
that could be damaged in the event of impact. Handle with care
during maintenance operations.
The procedure described under this heading must be carried out
when the instrument is used for the first time each day.
The tests must be conducted with the instrument positioned for
normal use.
- Before switching on the instrument, make certain that there is no
sign of damage visible on any part of the equipment, including the
accessories and the external power adapter; make a visual
inspection of the power cable and connectors to verify the integrity
of the insulation, and ensure that they are not subject to any kind of
mechanical loading or stress that could cause damage; check that
all parts and cables are properly connected.
To Next Page
Loading...
Need help?
General
