Also displayed in the settings window is an info icon, which can be selected
to view the serial number of the instrument, together with the firmware
version and the relative date.
GENERAL USER-SETTABLE PARAMETERS
General configuration parameters that can be set by the user are listed
below. A default value is indicated for each parameter. This represents the
factory setting.
Certain items may not be available, as they become active only when the
respective license is installed,
Language
Selection of the interface language used by the instrument.
Default value: English
Date and time menu
Access to the menu used to set the date and time. The default setting for the
time display is 24 hour format: this menu can be used to change the display
to 12 hour am/pm format.
Display brightness
The brightness of the display can be set between 20% and 100%.
Default value: 80%.
To Next Page
Loading...
Need help?
General
