POWER-UP AND MAIN SCREEN
Once all the cables are connected, the instrument can be switched on by
pressing and holding the on/off button; it can be switched off at any time by
pressing and holding the same button.
When the instrument is powered up, a pressure initialization
procedure will commence: to ensure the initialization routine is
brought about correctly, hold the tympanometer still with the probe
positioned in free space.
A few seconds after power-up, the display of the instrument will show the
main screen, illustrated below.
The main screen shows the buttons for selection of the main tests supported
by the Timpani, depending on the specific licenses that are activated.
The lower part of the main screen shows the icons that can be selected to
print, delete and save tests conducted during the current session.
To access the screen for acquisition of the required test, simply select the
relative button.
When at least one test has been conducted, the delete and save icons will be
enabled, allowing the user to clear the items of data collected or save them
To Next Page
Loading...
Need help?
General
