13
5.9 Turbo Function Setting
TURBO function: The unit at high fun speed can realize quick cooling or heating so that room
temperature can quickly approach setting temperature.
In cooling or heating mode, press Function button till the unit enters TURBO function and then
press Enter/cancel button to turn on TURBO function.
During TURBO function, press Function button till the unit enters TURBO function and then
press Enter/cancel button to cancel TURBO function.
TURBO function setting is shown in Fig.14:
Fig.14 Turbo Function Setting
Note:
1. TURBO function will be turned off after power failure and then recovery. In dry, fan and auto mode,
TURBO function can not be set and TURBO mark won’t be displayed.
2. TURBO function will be automatically canceled after setting of quiet function.
5.10 SAVE Function Setting
Energy Saving Function: Energy saving can make the air conditioner runs in a smaller temperature
range by setting lower limited value of setting temperature in cooling or dry mode and upper limited
value in heating mode.
To Next Page
Loading...
Need help?
General
