9
5.5 Swing Control Function
Under on-state of unit, press Function button till the unit enters swing control function and then
press Enter/cancel button to turn on “swing” control function.
During swing function, press Function button till the unit enters swing control function and then
press Enter/cancel button to cancel swing control function.
Swing control function setting is shown in Fig.10
Fig.10
5.6 Timer Setting
Press Timer button to set timer off of the unit. Under off-state of the unit, press Timer button to set
timer on of the unit in the same way.
Timer on setting: Under off-state of the unit without timer setting, if Timer button is pressed,
LCD will display xx hour, with ON blinking. In this case, press▲ or ▼ button to adjust timer on and
then press Timer to confirm. If Mode button is pressed before pressing Timer button to confirm, timer
mode will be switched to timer off setting mode. In this case, LCD displays xx hour, with OFF blinking.
In this case, press▲ or ▼ button to adjust timer off and then press Timer to confirm. When LCD
displays xx hour on off, xx hour means time of timer on, but time of timer off won’t be displayed.
Timer off setting: Under on-state of the unit without timer setting, if Timer button is pressed, LCD
To Next Page
Loading...
Need help?
General
