5
3. Buttons
Silk Screen of Buttons
Fig.3 Silk screen of buttons
Instruction to Function of Buttons
Table.2
No. Description Function of Button
1 Enter/cancel
① Function selection and canceling;
② Press it for 5s to enquiry the outdoor ambient temperature.
2 ▲
6 ▼
① Running temperature setting of indoor unit, range :16～
30°C
②Timer setting, range:0.5-24hr
③Switch over between quiet/auto quiet.
3 Fan Setting of high/middle/low/auto fan speed
4 Mode Setting of cooling/heating/fan/dry mode of indoor unit
5 Function
Switchover among these functions of
air/sleep/turbo/save/e-heater/blow/quite
7 Timer Timer setting
8 On/off Turn on/off indoor unit
4 Mode
and
2 ▲
Memory
function
Press Mode and ▲for 5s under off state of the unit to
enter/cancel key memory function (If memory is set, indoor
unit will resume original setting state after power failure and
then power recovery. If not, indoor unit is defaulted to be off
after power recovery. Memory function is defaulted to be off
before outgoing.)
2 ▲
and
6 ▼
Lock
Upon startup of the unit without malfunction or under off state
of the unit, press ▲ ▼ key at the same time for 5s in to lock
state. In this case, any other buttons won’t respond the press.
Repress ▲ ▼ key for 5s to quit lock state.
To Next Page
Loading...
Need help?
General
