4
2.2 Instruction to LCD Display
Table.1
No. Description Instruction to Displaying Contents
1 Swing Swing function
2
Air ＊
Air exchange function
3 Sleep Sleeping states
4 Running mode Each kind of running mode of indoor unit (auto mode)
5 Cooling Cooling mode
6 Dry Dry mode
7 Fan Fan mode
8 Heating Heating mode
9 Defrost Defrosting state
10
Gate-control card＊
Gate control
11 Lock Lock state
12 Shield
Shielding state (buttons, temperature, on/off, mode or save is
shielded by long-distance monitoring
13 Turbo Turbo function state
14 Memory
Memory state (Indoor unit resumes original setting state
after power failure and then power recovery)
15 Twinkle Flicking when unit is on without operation of button
16 Save Energy-saving state
17 Temperature Ambient/setting temperature value
18
E-Heater＊
E-HEATER display means electric- heater is available
19 Blow Blow mark
20 Timer Timer-displayed location
21 Quiet Quiet state(two types: quiet and auto quiet)
Notes: The functions with * are reserved for other models and are not applicable for the models
listed in this manual.
To Next Page
Loading...
Need help?
General
