53
12.5.6 Routine Checks after Installation
Check after installation
Table.11
Items to be checked Possible Malfunction(s) Items to be checked
Has it been fixed firmly?
The unit may drop, shake or emit
noise.
Has it been fixed firmly?
Have you done the
refrigerant leakage test?
It may cause insufficient
refrigerating capacity.
Have you done the
refrigerant leakage test?
Is the heat insulation
sufficient?
It may cause condensation and
dripping.
Is the heat insulation
sufficient?
Does the unit drain well?
It may cause condensation and
dipping.
Does the unit drain well?
Is the voltage in accordance
with the rated voltage
marked on the nameplate?
It may cause electric malfunction
or damage the part.
Is the voltage in accordance
with the rated voltage
marked on the nameplate?
Is the electric wiring and
piping connection installed
correctly and securely?
It may cause electric malfunction
or damage the part
Is the electric wiring and
piping connection installed
correctly and securely?
Has the unit been connected
to a secure earth
connection?
It may cause electric leakage.
Has the unit been connected
to a secure earth connection?
Is the power cord specified?
It may cause electric malfunction
or damage the part.
Is the power cord specified?
Have the inlet and outlet
been covered?
It may cause insufficient
refrigerating capacity.
Have the inlet and outlet
been covered?
Has the length of the
connection pipes and the
refrigerant charge been
recorded?
The refrigerating capacity may
be not accurate.
Has the length of the
connection pipes and the
refrigerant charge been
recorded?
WARNING! :
1. This appliance is not intended for use by persons (including children) with reduced physical
sensory or capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with this appliance.