To Next PageTo Next PageWhat to do if Invertek Drives ODE-3-220105-1F42 DC Drives shows 'Under voltage on DC bus'?
If your Invertek Drives DC drive displays an 'Under voltage on DC bus' error during operation, it means the incoming supply voltage is too low. Check the incoming power supply voltage and all components in the power feed line to the drive.
General| Output Current | 105A |
|---|---|
| Phase | Single Phase |
| Communication Interface | Modbus RTU |
| Enclosure Rating | IP20 |
| Control Method | V/F Control, Sensorless Vector Control |
| Protection Features | Overload, Overvoltage, Undervoltage |
| Input Voltage | 220VAC |
Crucial safety warnings for installation and operation of the variable speed drive.
Recommendations for mounting drives within enclosures for optimal cooling and protection.
Illustrates the overall wiring connections for power and control terminals of the drive.
Details the importance and methods for establishing proper protective earth connections.
Covers cable selection, fixed installation, and protective devices for incoming power.
Guidelines for connecting the motor to the drive, including cable types and limitations.
Lists default functions for control terminals, including digital and analog I/O.
Step-by-step guide on how to navigate and modify drive parameters using the keypad.
Details standard parameters for motor setup, speed limits, and ramp times.
Covers extended parameters for digital inputs, relay outputs, and preset frequencies.
Details macro functions for terminal control mode, mapping digital inputs to functions.
Details macro functions for keypad control mode, mapping inputs to functions.
Details macro functions for fieldbus control modes, mapping inputs to functions.
Lists common fault codes, their descriptions, and suggested remedies for troubleshooting.
