INVT GD300-01-7R5G-4 - Page 69

Goodrive300-01 inverter for air compressor Function parameters
-68-
Function
code
Name
Detailed instruction of parameters
Default
value
Modif
y
AM2 iron core
P12.13
Magnetic
saturation
coefficient 3 of
AM2 iron core
0.0~100.0%
57.0%
◎
P12.14
Magnetic
saturation
coefficient 4 of
AM2 iron core
0.0~100.0%
40.0%
◎
P12.15
Rated power of
SM2
0.1~3000.0kW
Set the parameters of the
controlled synchronous
motor.
To guarantee the control
performance, be sure to set
P12.15~P12.19 correctly
according to the name plate
of the motor.
The accuracy of parameter
autotuning for
Goodrive300-01 inverters
depends on correct setting of
motor parameters on the
name plate.
To guarantee the control
performance, configure the
motor as the standard motor.
If the motor power has a
great gap between the
standard, the control
performance of the inverter
will decrease obviously.
Note: Resetting the motor
rated power (P12.15) will
initialize P12.16~P12.19.
Depend
on model
◎
P12.16
Rated frequency
of SM2
0.01Hz~P00.03 (Max.
output frequency)
50.00Hz
◎
P12.17
Number of poles
pairs for SM2
1~50
2
◎
P12.18
Rated voltage of
SM2
0~1200V
Depend
on model
◎
P12.19
Rated current of
SM2
0.8~6000.0A
Depend
on model
◎
P12.20
Stator resistor of
SM2
0.001~65.535Ω
After motor parameter
autotuning, the settings of
P12.20~P12.22 update
automatically. As basic
parameters for high
Depend
on model
○
P12.21
Direct axis
inductance of
SM2
0.01~655.35mH
Depend
on model
○