INVT GD300-01-7R5G-4 - Page 68

Goodrive300-01 inverter for air compressor Function parameters
-67-
Function
code
Name
Detailed instruction of parameters
Default
value
Modif
y
AM2
P12.01~P12.05 correctly
according to the name plate
of the motor.
The accuracy of parameter
autotuning for
Goodrive300-01 inverters
depends on correct setting of
motor parameters on the
name plate.
To guarantee the control
performance, configure the
motor as the standard motor.
If the motor power has a
great gap between the
standard, the control
performance of the inverter
will decrease obviously.
Note: Resetting the motor
rated power (P12.01) will
initialize P12.02~P12.05.
on model
P12.04
Rated voltage of
AM2
0~1200V
Depend
on model
◎
P12.05
Rated current of
AM2
0.8~6000.0A
Depend
on model
◎
P12.06
Stator resistor of
AM2
0.001~65.535Ω
After motor parameter
autotuning, the settings of
P12.06~P12.10 update
automatically. As basic
parameters for high
performance vector control,
the parameters have a direct
impact on the control
performance.
Note: Users should not
change the parameters of
the group.
Depend
on model
○
P12.07
Rotor resistor of
AM2
0.001~65.535Ω
Depend
on model
○
P12.08
Leakage
inductance of
AM2
0.1~6553.5mH
Depend
on model
○
P12.09
Mutual inductance
of AM2
0.1~6553.5mH
Depend
on model
○
P12.10
Non-load current
of AM2
0.1~6553.5A
Depend
on model
○
P12.11
Magnetic
saturation
coefficient 1 of
AM2 iron core
0.0~100.0%
80.0%
◎
P12.12
Magnetic
saturation
coefficient 2 of
0.0~100.0%
68.0%
◎