INVT Goodrive350 Series

Goodrive350 series high-performance multi-function inverter Chapter 6
-160-
Function
code
Name
Detailed parameter description
Default
value
Modi
fy
23: Brake unit fault (bCE)
24: Running time reached (END)
25: Electronic overload (OL3)
26: Keypad communication error (PCE)
27: Parameter upload error (UPE)
28: Parameter download error (DNE)
29–31: Reserved
32: To-ground short-circuit fault 1 (ETH1)
33: To-ground short-circuit fault 2 (ETH2)
34: Speed deviation fault (dEu)
35: Mal-adjustment fault (STo)
36: Underload fault (LL)
37: Encoder offline fault (ENC1O)
38: Encoder reversal fault (ENC1D)
39: Encoder Z pulse offline fault (ENC1Z)
40: Safe torque off (STO)
41: Channel H1 safety circuit exception (STL1)
42: Channel H2 safety circuit exception (STL2)
43: Channel H1 and H2 exception (STL3)
44: Safety code FLASH CRC fault (CrCE)
45: PLC card customized fault 1 (P-E1)
46: PLC card customized fault 2 (P-E2)
47: PLC card customized fault 3 (P-E3)
48: PLC card customized fault 4 (P-E4)
49: PLC card customized fault 5 (P-E5)
50: PLC card customized fault 6 (P-E6)
51: PLC card customized fault 7 (P-E7)
52: PLC card customized fault 8 (P-E8)
53: PLC card customized fault 9 (P-E9)
54: PLC card customized fault 10 (P-E10)
55: Repetitive extension card type fault (E-Err)
56: Encoder UVW loss fault (ENCUV)
57–58: Reserved
59: Motor over-temperature fault (OT)
60: Card slot 1 card identification failure (F1-Er)
61: Card slot 2 card identification failure (F2-Er)
62: Card slot 3 card identification failure (F3-Er)
63: Card slot 1 card communication timeout fault
(C1-Er)