www.ioncamera.com EN - 13
Inserting MicroSD Card (not included)
The Adventure supports MicroSD cards up to 128GB (Class 6 or higher cards are
recommended) which allows you to take High Definition (HD) Video for
approximately 4 hours (1080p 30 fps or 720p 60 fps). If there is no MicroSD card in
the camera, the Red and Blue LED will flash alternatively and continuously.
To insert a MicroSD card
The camera has two MicroSD card slots, one for CAR mode and the other for DV
mode. A MicroSD card (not included) must be inserted in at least one of the slots
to use your camera.
There is only one direction to insert the MicroSD card into the slot. Do not force
the card into the card slot as it may damage both the camera and the MicroSD
card.
Camera power must be OFF when inserting or removing a card. Files or the
card may be corrupted if a card is inserted or ejected whilst power is on.
A new MicroSD card should be formatted before use. For instructions on how
to format the card, please refer to the Section “CONNECTING CAMERA TO A
TV” or use your computer’s native formatting facilities.
To Next Page
Loading...
Need help?
General
