IPCAM User Manual
4 / 67
1.User Manual brief introduction
Thank you for choosing our network ip camera. The manual can help you to
use the camera correctly. Some descriptions maybe aren’t perfect. If you meet
unsolvable problems according to this manual,please contact the product supplier.The
camera’s software,hardware and shell will update ,we will be subject to change
without notice.But we will released updated notice on our website,please pay
attention to it.
1.1 Appointment
Please obey this manual strictly to use the camera.
1.2 Cautions
Before using the camera, please read all the safety instructions as below carefully
then install .
1.2.1 Installation environment
The camera can be installed indoor ,if outdoor, please add waterproof
components and lightning protection equipment;
Working temperature limited to 0 ℃ ~ 50 ℃ between, humidity limited to 5%
~ 90% (non-condensable)
Banned in inflammable, explosive environment install and use;
Avoid installing in strenuous vibration place, do not put other equipment on
the camera;
Avoid installing near a strong field of electronic equipment that could cause
the unit cannot be normal use and even damage;
To ensure the normal radiating of camera, should avoid the poor ventilation
places or high temperature environment;
Use wireless ip cameras, should try to avoid or reduce transmission range of
obstacles
1.22 Transporting and carrying
The camera package has aseismatic design and testing, ensure ip cameras will
not be accidental breaking during transport, in handling this unit, it is best to
use original package. Avoid moving the camera between extreme cold and hot
place, Avoid machine internal dewing, affect the service life of equipment.
To Next Page
Loading...