IPCAM User Manual
6 / 67
2 Products overview
IPCAM is an integrated wireless IP Camera solution. It combines a high quality digital
video Camera with network connectivity and a powerful web server to bring clear to
your desktop from anywhere on your local network or over the Internet.
The basic function of IPCAM is transmitting remote video on the IP network. The high
quality video image can be transmitted with 30fps speed on the LAN/WAN by using
MJPEG hardware compression technology.
The IPCAM is based on the TCP/IP standard. There is a WEB server inside which
could support Internet Explore. Therefore the management and maintenance of your
device become more simply by using network to achieve the remote configuration,
start-up and upgrade firmware.
You can use this IPCAM to monitor some special places such as your home and your
office. Also controlling the IPCAM and managing image are simple by clicking the
website through the network.
NOTE: You can use the IP Camera Step by Step(details: 3).
2.1.1 Features
● Powerful high-speed video protocol processor
● High-sensitivity 1/4" CMOS sensor
● 300K Pixels
● IR night vision(Range:3~5m)
● Optimized MJPEG video compression for transmission
● Multi-level users management and passwords definition
● Embeded Web Server for users to visit by IE
● Support wireless network (Wi-Fi/802.11/b/g)mobile
● Supporting Dynamic IP (DDNS)and UPnP LAN
● Giving alarm in cause of motion detection
● Support one-way (I/O) alarm connection
● Supporting image snapshot
● Support multiple network protocols:
HTTP/TCP/IP/UDP/STMP/DDNS/SNTP/DHCP/FTP
● Support remote system update
To Next Page
Loading...