IPCAM User Manual
61 / 67
2. Reason:IP address occupy by other device
Solution: Choose automatic gain
3. Reason: IP address located within different subnet
Solution: Check IPCAM’S ip address and subnet mask address and gateway
settings.
Reason:Web port has been modified
Solution:contact network administrator to obtain port information.
4. Reason:unknown
Solution:Press reset button to factory default state,then reconnecting.systen
default to gain ip address automatic,subnet mask is 255.255.255.0
5.3 IPCAM special use
5.31 Use vlc player and mplayer to play ip camera audio data prompt.
(parameter:
/videostream.asf?user=&pwd=&resolution=&rate=
)
Show as below: