iPECS eMG80/100 & eMG800 & UCP
User Portal User Guide Issue 1.4
23
9.2 Station Call Forward
Selecting Station Call Forward will be displayed the input entry page. Click [Save] button after changing Value
to apply.
Figure 8.2-1 Station Portal Call Forward
Stations can be programmed so that incoming calls re-route to another station (local or networked), a station
group, the built-in Voice Mailbox, or over a system CO/IP line (Off Net). Call Forward can be separately
assigned to forward calls unconditionally, or when the call encounters a Busy, No-Answer or Busy/No Answer
condition.
To Next Page
Loading...
