iPECS eMG80/100 & eMG800 & UCP
User Portal User Guide Issue 1.4
27
9.6 Flexible Buttons
Selecting Flexible Buttons will be displayed the input entry page. Select the Station Type from the drop-down
menu and then click [Load] to modify each Flexible Button. Click [Save] button after changing Value each
attribute to apply.
Figure 8.6-1 Flexible Buttons
Each Flex button for each iPECS IP and LDP Phone, and DSS Console can be assigned a function (Type)
from the drop-down menu. After selecting the Type for a button, enter the value, if required.
If the station employs the LCD to display the button function, the LSS Label field can be used to assign a label
that displays in the LCD.
To Next Page
Loading...
