IPG YLS-2000-K - Non-Intended Use; Obligations of the System Owner

19YLS-K
2.3 Non-intended use
The operational safety of the supplied product is only guaranteed if the
intended use is complied with. The limit values listed in the technical
data must be complied with.
The use of optics (e.g. fiber coupler, process fiber, process optics) that
are not authorized by IPG Laser GmbH is not covered by the warranty.
2.4 Obligations of the system owner
The system owner must ensure that the safety and health of the operat-
ing personnel are always protected during use of the product.
The system owner must ensure that
• the product is used only as intended (see Intended use [}18]).
• the product is used only in a flawless, properly functional condi-
tion.
• all safety and warning signs are affixed to the product and read-
able.
• appropriate fire protection is present at the setup location.
• the safety equipment is always freely accessible and is regularly
inspected.
• the responsibilities of the assigned personnel are defined and
complied with.
• only properly trained or educated personnel operate, maintain or
repair the product.
• the operating personnel has completely read and understood the
operating manual and knows all the safety instructions and resid-
ual dangers described in the operating manual.
• first aid is made possible for the operating personnel (e.g.
through first aid training and appropriate first aid equipment).
• the personal protective gear is available to the operating and
maintenance personnel and used in accordance with the applica-
ble regulations.
• the operating personnel are not under the influence of drugs, al-
cohol or medications that reduce reaction speed.
• the safety- and risk-conscious work of the personnel is regularly
inspected.
• any specified maintenance and inspection work is performed on
time.
• electrical work is only performed by qualified electricians.
 | Safety