| Delivery and transport
42
YLS-K
Figure17: Transport with pallet
4.3 Returning the product
ð Only return the product when asked to do so by IPG Laser GmbH.
ð Never send a product back to IPG Laser GmbH without enclosing
a valid R eturn M aterial A uthorization number (RMA no.).The
RMA number can be obtained from the IPG Laser GmbH service
department.
ð Use suitable packaging for the return shipment of the product.
We recommend that you use the original packaging.
ð Secure the product with the available wooden crossbar (1) to
prevent transport damage (see the example in the figure below).
To Next Page
Loading...
