| General information
8
YLS-K
1.3 Target groups for this operating manual
The translation of the original operating manual for the product was
created by IPG Laser GmbH for the operating and maintenance person-
nel of the system owner.
The operating personnel must have corresponding vocational training
and be trained in the operation of the product (see Personnel qualifica-
tions [}20]).
The maintenance personnel are responsible for the assembly/installa-
tion, maintenance and repair. The personnel must have been trained in
maintenance of the product by IPG Laser GmbH or another competent
IPG branch office. Successful participation in the training is confirmed
with a certificate (see Personnel qualifications [}20]).
1.4 Warranty
IPG Laser GmbH offers a warranty for all of its products with regard to
material and manufacturing defects for the period specified in the appli-
cable purchase contract or in the specifications. The warranty period
begins on the date of delivery agreed upon in the purchase contract.
In addition, IPG Laser GmbH guarantees that this product satisfies all
applicable specifications in normal operation.
During the warranty period, IPG Laser GmbH may choose to repair or
replace a product that is found to be defective in the opinion of IPG
Laser GmbH with regard to material and manufacturing defects.
Warranty period
The warranty period for all products repaired or replaced during the
warranty period is limited to the remaining period of the original war-
ranty period and is only offered for the individual defective product.
IPG Laser GmbH reserves the right to issue a credit for all defective
products that have proven to be faulty during normal operation.
ð Contact qualified IPG personnel for all maintenance work. All in-
quiries in connection with repairs or replacements within the
framework of this warranty must be made immediately after the
defect was discovered; such inquiries must be made directly to
IPG Laser GmbH or its local representative.
Driver software
Current and future software is subject to the non-exclusive licensing
conditions of IPG Laser GmbH. Using the software automatically consti-
tutes acceptance of the licensing conditions.
Service and re-
pairs
When sending back components / products, observe the following in-
structions:
To Next Page
Loading...
