IPG YLS-2000-K - LaserNet Software; System Requirements; Installing the Software

 | LaserNet software
70
YLS-K
8 LaserNet software
The software LaserNet is included with the laser. You can operate and
monitor the laser with the help of LaserNet. Fast Ethernet 100 Mbit/s is
used as the interface between the computer and the laser.
8.1 System requirements
In order that you can operate the LaserNet software on your PC, the fol-
lowing system requirements must be met:
• Pentium III/IV 1 GHz or compatible (recommended - Pentium IV
2 GHz)
• RAM 256 MB (recommended 512 MB)
• Screen resolution 1024х768 (XGA) 256 colors (recommended -
True Color)
• Ethernet 100 Mbit
• CD/DVD drive (only for installation)
• Operating system Windows 2000 / XP / VISTA / 7 / 8 / 10
8.2 Installing the software
The installation wizard installs the software on your computer and
places a shortcut on your desktop for starting the software, if desired.
1. Insert the installation CD into the CD drive of your computer.
2. Open the folder LaserNet\Setup.
3. Double-click the LaserNet Setup.exe installation file to open the
installation wizard.
4. Click on Next
.