I A P 2 0 2 3 . 0 0 1 - A F M / I R I S T E X A N I I P A G E | 118
FOR SIMULATION USE ONLY – NOT A TRAINING AID
When ABS is selected, the selection applies for 15
seconds and then reverts to REL.
W4 - Has no display or control functionality.
SYS - DISPLAY - G LIMITS
On the lower-level system page, the G limits page allows pilots to view and change
the positive and negative G limit audio alert settings. This value will determine when
a discrete over-G tone is heard in the headset. The tone is activated 0.5 prior to
reaching this setting.
Key Window Action
SYS – DISPLAY
- G
POS NN
W1 - Is a data entry window with the label POS
left-justified and data consisting of a two digit
decimal number indicating the current positive G
limit, which has an allowable range of
0.0 to 7.0.
Upon data entry mode activation by pressing W1,
the pilot is able to increase/decrease the positive
G value by using the alphanumeric keyboard
followed by a press of the
ENT button.
NEG NN
W2 – Is a data entry window with the label NEG
left-justified and data consisting of a two digit
decimal number indicating the current negative G
limit, which has an allowable range of 0.0 to 3.5.
Upon data entry mode activation by pressing W2,
the pilot is able to increase/decrease the negative
G value by using the alphanumeric keyboard
followed by a press of the
ENT button.
W3 - Has no display or control functionality.
W4 - Has no display or control functionality.
To Next Page
Loading...