I A P 2 0 2 3 . 0 0 1 - A F M / I R I S T E X A N I I P A G E | 122
FOR SIMULATION USE ONLY ā NOT A TRAINING AID
Key Window Action
CLK
TIME Z
W1 - Is a data display window that displays the
label TIME Z and W1 has no control functionality.
HH:MM:SS
W2 - Is a data display window that displays the
current time (GMT) in the format HH:MM:SS and
has no control functionality.
START or
STOP
W3 - Has an initial default display with the text
START, right-justified.
When W3 is pressed, the timer activation state is
started.
When the timer activation state is started, the text
STOP is displayed on W3 right-justified.
A subsequent press of W3, while the timer is
running, sets the timer activation state to stopped
(Paused) and the stopped time is displayed on W4.
R MM:SS
W4 - Displays the letter R left-justified to
represent reset and displays the timer right-
justified in the format MM:SS where MM is
minutes, and SS is seconds.
The timer starts counting up from zero to 99:59
and stops and continues to display that time until it
is reset.
Pressing the associated key while the timer is
active pauses the timer, and pressing the
associated key while the timer is paused restarts
the timer from the paused time.
Pressing the associated key for 2 seconds or ore
when the timer is active or paused, deactivates the
timer, resets the timer count to zero, and restores
the display of START.
To Next Page
Loading...