CHAPTER 7. GENERAL SETTINGS 56
cause clipping, unless prevent clipping is enabled. The pre-amp can be set
to any decibel (dB) value between -12dB and +12dB, in increments of 0.1dB.
Beep Volume Controls the volume of the beep that is heard when skipping forward
or backward between tracks. The beep is disabled when set to OFF.
Auto-Change Directory Control what Rockbox does when it reaches the end of a di-
rectory. If AUTO-CHANGE DIRECTORY is set to YES, Rockbox will continue to the
next directory. If AUTO-CHANGE DIRECTORY is set to NO, playback will stop at
the end of the current playlist. Using the RANDOM feature requires you to first
generate a folder list via the Random Folder Advance Configuration plugin (see
section 10.4.9 (page 127)).
Note: You must have the REPEAT option set to NO for AUTO-CHANGE DIREC-
b
TORY to function properly.
Note: This feature only works when songs have been played from the file browser.
b
Using it with the database may cause unexpected behavior.
Last.fm Log Enables logging of your played tracks for submittal to http://www.last.fm.
This service was formely known as Audioscrobbler. When you enable this option,
you’ll have to reboot to start the logging. The log-file is called .scrobbler.log,and
is to be found in the root directory of your player.
Note: See ZLastFMLog for a further description, and for tools you can use to
b
submit your Last.fm log.
Cuesheet Support Enables reading of cuesheet files for played tracks. If a cuesheet is
found for a track, track markers are displayed on the progressbar and it is possible
to skip between the tracks within the cuesheet. Also the information found in the
cuesheet file will replace the information from the ID3 tags. When you enable this
option, you’ll have to reboot for it to come into effect.
Skip Length Designed to speed up navigation and prevent unintentional track skip-
ping when listening to long audio tracks, SKIP LENGTH changes the behavior of
the Left and Right buttons so that they skip by a given number of minutes instead
of skipping to a new track.
Note: To skip tracks with this setting set to a time interval, press Short Left + Long
b
Right to go forward and Short Right + Long Left to go back.
7.2 Playlist
The PLAYLIST sub menu allows you to configure settings related to playlists.
Recursively Insert Directories. If set to ON, then when a directory is inserted or
queued into a dynamic playlist, all subdirectories will also be inserted. If set to
ASK, Rockbox will prompt the user about whether to include sub-directories.
THE ROCKBOX MANUAL IRIVER H3XX
To Next Page
Loading...
