CHAPTER 7. GENERAL SETTINGS 59
Upside Down: Displays the screen so that the top of the display is nearest the
buttons. This is sometimes useful when carrying the player in a pocket for
easy access to the headphone socket.
Remote-LCD Settings: This sub menu contains settings that relate to the display of
the remote.
Backlight: Similar to the main unit backlight this option controls the backlight
timeout for the remote control. The remote backlight is independent from
the main unit backlight.
Backlight on When Plugged: This controls the backlight when the player is plugged
into the charger.
Caption Backlight: This option turns on the backlight a number of seconds be-
fore the start of a new track, and keeps it on for the same number of seconds
after the beginning so that the display can be read to see song information.
The amount of time is determined by the value of the backlight timeout set-
ting, but is no less than 5 seconds.
First Keypress Enables Backlight Only: This controls what happens when you
press a button on your remote while the backlight is turned off. Like for the
main unit, if this setting is set to YES, the first keypress will light up the
remote backlight, but have no other effect. If set to NO, the first keypress
will light up the remote backlight and engage the function of the key that is
pressed.
Contrast: Changes the contrast of your remote’s LCD display.
Warning: Setting the contrast too dark or too light can make it hard to find
!
this menu option again!
LCD Mode: This setting lets you invert the whole screen, so now you get a black
background and light text and graphics.
Upside Down: Displays the screen so that the top of the display is nearest the
buttons. This is sometimes useful when carrying the player in a pocket for
easy access to the headphone socket.
Reduce Ticking: Enable this option if you can hear a ticking sound in your head-
phones when using your remote.
Scrolling This feature controls how text will scroll in Rockbox. You can configure the
following parameters:
Scroll Speed: Sets how many times per second the automatic horizontal scrolling
text will move a step.
Scroll Start Delay: Controls how many milliseconds Rockbox should wait be-
fore a new text begins automatically scrolling.
Scroll Step Size: Defines the number of pixels the text should move for each
step, as used by the Scroll Speed setting.
Remote Scrolling Options: The options here have the same effect on the remote
LCD as the options mentioned above have on the main LCD.
THE ROCKBOX MANUAL IRIVER H3XX
To Next Page
Loading...
