38
Most common causes:
• Home Base placement is not appropriate
• Electrical contacts on Home Base or Robot are dirty
Troubleshooting:
• Make sure Light Houses are set to “Light House” mode rather than
“Virtual Wall” mode.
• Check for proper Home Base and Light House placement as described in
the owner’s manual.
• If problem is not resolved, follow the steps outlined in the “Charging
issues” section below.
Wireless Command Center
Customer observations
Wireless Command Center (WCC) has poor range.
Most common causes:
WCC is not paired with Roomba.
Troubleshooting:
• Follow WCC troubleshooting guide in main document which describes
‘pairing’ process described in manual.
To Next Page
Loading...
