ISHIDA AC-3000 - Parts Required for Mounting; Options

AC-3000 SYSTEM SETUP OVERVIEW
................
1. AC-3000lAC-3000E Main Units Required unit count
....
2. Function Expansion Accessory Kit (Part No 41-741 0-03)
One set
[Kit includes the following parts]
.....................
Master board (P-835) 1
...............................
Guide rails 2
...................................
Collar 1
M3 screw ................................ 1
.................................
Harness 1
..........................
RS-232C Harness 1
..................................
Bracket 1
...........................
He-x connectors 2
..................................
Sticker 1
3. Program
ROM
Main boards (For master & satellite scales) . . Scale count
Master board (For master scale only) ....... 1
4. 12 NET Cable
............... Master board program ROM
1
5. Required Instruction Manuals
This manual and the AC-3000lAC-3000E Service Manuals
One optional
12 NETcable can be used for system expansion.
Required Parts
Harness C2 I2 NET (Part No. 36-3364-08)
Hex screw rods (Part No. 39-4383-04)
IMPORTANT!
The 12 NET cable cannot be connected until after the function expansion accessory
kit (Part No 41-741 0-03) has been installed.
AC-3000 SYSTEM SETUP REV 0