ISLA Instruments S2400 User Manual
– 50 –
Save Live Loop as a Sample
If the selected Live Loop has sound recorded in it, the sound can be saved to a WAV file.
The save screen has the following fields:
Save To: The destination for the file. Options are project folder, or any selected folder.
Project: The name of the project where the file will be saved. Project is only shown when Save
To is set to Project. If the current project has not been saved, then this field is editable, and
there will be an asterisk next to the word Project indicating that a new project will be created.
Folder: The destination folder where the file will be saved. If Save To is set to Same File, then
this field is not editable. Folder is not shown when Save To is set to Project. Select the folder
name to display the file browser and pick a different folder.
Name: The name of the file. Defaults to Sample plus a sequential three-digit number which is
automatically set. Select the name to edit the file name.
Assign to Track: After saving, the new file can be assigned to a track. Select the desired track
from the list, or press a pad to fill in the track.
Clear & Add to Pattern: If checked, and the saved sound is assigned to a track, the Live Loop will
be cleared, and an event added to the beginning of the pattern for the assigned track. So, the
pattern will play the same as it did when the sample was a Live Loop.
To Next Page
Loading...