6D1-6 ENGINE ELECTRICAL
Removal
1. Remove negative cable (1).
2. Remove positive cable (2).
3. Remove retainer screw and rods (3).
4. Remove retainer (4).
5. Remove battery (5).
Installation
1. Install battery.
2. Install retainer.
3. Instal retainer screw and rods.
NOTE: Make sure that the rod is hooked on the body side.
4. Install positive cable.
5. Install negative cable.
Main Data and Specifications
General Specifications
Model (JIS) 34B19L 46B19L 50D20L
Voltage (V) 12 12 12
Cold Cranking Performance (Amp) 272 325 306
Reserve Capacity (Min) 49 71 78
To Next Page
Loading...
