Isuzu 20LE - Installation

ENGINE EXHAUST 6F-9
Installation
1. Install front exhaust pipe (3) and tighten four stud nuts.
Torque:
Stud Nuts: 28 N⋅m (2.9 kgf⋅m)
Nuts: 43 N⋅m (4.4 kgf⋅m)
2. Tighten front side O
2
sensor and reconnect O
2
sensor
harness connector. (If applicable)
Torque:55 N⋅m (5.6 kgf⋅m)