EasyManua.ls Logo

ITech IT6000D Series

ITech IT6000D Series
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Quick Reference
Keys Description
In CV priority (default) mode, press [V-set], the interface
displays “Vset=0.00V” (Setting value of voltage). In CC
priority mode, press [V-set], the interface displays “Vlim=
0.00V” (Upper limit of voltage), the lower limit of the volt-
age is 0.
[I-set] Set the output current value
In CV priority (default) mode, press [I-set], the interface
displays “Ilim=0.00A” (Upper limit of current) , the lower
limit of the current is 0. In CC priority mode, press [I-set],
the interface displays “Iset=0.00A” (Setting value of
current).
[P-set] Set the output power value
Press [P-set], the interface displays “Plim=0.00W”
(Upper limit of power) , the lower limit of the power is 0.
[Recall] Returns the instrument to the specified setup.
[Shift] Composite key, combined with other keys to realize functions
marked above keys.
[Esc] Press this key to exit the current operation interface.
[0]-[9] Numeric keys
+/– Positive and negative signs
. Decimal point
Left / Right
navigation
keys
The left and right navigation keys are used to adjust the cur-
sor to the specified position or scrolls pages to view menu
items.
Up / Down
navigation
keys
The up and down navigation keys are used to scroll page up
and down to view menu items.
[Enter] Operation confirmation key
Copyright © Itech Electronic Co., Ltd.
5

Table of Contents

Related product manuals