Power Supply Function
Pmp Set the maximum power.
Vmp Set the maximum power
voltage.
Formula Regulatory settings. The
choice of solar panel materi-
als under different regulations
is different.
SANDIA
• TF: Thin-Film
• SCMC: Stand-
ard Crystalline
or Multi-
crystalline
• HEC: High-effi-
ciency
Crystalline
E-
N50530
• TF: Thin-Film
• cSi
Save To Set the saved file name. Pa-
rameter setting ranges from 1
to 100
User-
de-
fined
User-definable PV curves
Voc Set the open-circuit voltage value.
Imp Set the maximum power current value.
Vmp Set the maximum power voltage value.
Isc Set the short-circuit current value.
Table Indicates a user-defined 4096-point I-V data table. This
menu item is reserved and can only be used in PV SAS
software sold separately. This function cannot be used in
the VFD screen.
Filter Filter the input voltage of the instrument to reduce
interference.
Low The filtering speed is low speed.
Mid The filtering speed is medium speed.
Copyright © Itech Electronic Co., Ltd.
91
To Next Page
Loading...
