To Next Page

To Previous Page

Basic Operation

1. Press the composite keys [Shift]+[P-set] (System) on the front panel to en-

ter the system menu.

2. Press the Up/Down key or turn the knob to select the PowerOn and press

[Enter].

3. Press the Left / Right key or turn the knob to adjust the value of this

parameter.

• Reset: Default value, indicates when the instrument is powered on, the

instrument will initialize some parameter settings or state.

The affected parameters and the reset information are as shown in the

following table.

Table 5–1 Initial value of the parameter

Category Parameter Initial Value

Main

interface

Voltage setting: Vs One percent of the

rated voltage of the

instrument

Current setting: Is One percent of the

rated current of the

instrument

Upper limit of voltage: Vh, and

lower limit of voltage: Vl

Upper limit value: One

percent of the rated

voltage of the

instrument

Lower limit value: 0

Upper limit of current: I+, and

lower limit of current: I-

One percent of the

rated current of the

instrument

Upper limit of power: P+, and

lower limit of power: P-

Rated power value of

the instrument

[On/Off] status Off

Config

Mode CV

Speed High

106

Brand	ITech
Model	IT6018C-1500-30
Category	Power Supply
Language	English

ITech IT6018C-1500-30 User Manual

Table of Contents

Questions and Answers:

ITech IT6018C-1500-30 Specifications

Related product manuals