ITech IT6018C-1500-30

Technical Specification
(within 12 months, 25℃
±5℃)
Current ≤0.1% + 0.1%FS
±(％of Output+Offset)
Power ≤0.5% + 0.5%FS
Resistance ≤1% + 1%FS
Read Back Accuracy Voltage
≤0.02% + 0.02%FS
(within 12 months, 25℃
±5℃)
Current ≤0.1% + 0.1%FS
±(％of Output+Offset)
Power ≤0.5% + 0.5%FS
Resistance ≤1% + 1%FS
Ripple Voltage ≤900mVpp(MAX:≤2250mVpp)
(20Hz -20MHz)
Current ≤0.1%FS RMS
Setup Temperature
Coefficient
Voltage
≤50PPM/℃
(％of Output/℃+Offset)
Current ≤200PPM/℃
Read Back Temperature
Coefficient
Voltage
≤50PPM/℃
(％of Output/℃+Offset)
Current ≤200PPM/℃
Rise time( no load ) Voltage
≤15ms
Rise time( full load ) Voltage
≤30ms
Fall time( no load ) Voltage
≤30ms
Fall time( full load ) Voltage
≤15ms
Transient Response Time Voltage
≤2ms
AC Input
Voltage
198V to 264V (Derating 50%) 342V to
528V(Three-phase four-wire)
Frequency
47Hz to 63Hz
Setup stability-30min Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% +0.1%FS
Setup stability-8h Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% +0.1%FS
Readback stability-30min Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% +0.1%FS
Readback stability-8h Voltage
≤0.02% + 0.02%FS
（％of Output +Offset）
Current ≤0.1% +0.1%FS
Efficiency
~ 92%
Remote Sense
Compensation
≤22.5V (2Vmin)
Copyright © Itech Electronic Co., Ltd.
159