ITech IT6512D - Carwave:lv124:E09:Ubmin[:Level]; Carwave:lv124:E11[:State]

Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 92
Returns
0|1
CARWave:LV124:E09:UBMIN[:LEVel]
This command is used to set keeping voltage Ubmin of LV124 E09.
Command syntax
CARWave:LV124:E09:UBMIN < value >
Arguments
MINimum|MAXimum|NR3
Reset Value
6.0
Example
CARWave:LV124:E09:UBMIN 20
Query syntax
CARWave:LV124:E09:UBMIN?
Returns
NR3
CARWave:LV124:E11[:STATe]
This command is used to simulate LV124 E11.
Command syntax
CARWave:LV124:E11 <bool>
Arguments
ON|OFF|1|0
Reset Value
0
Example
CARWave:LV124:E11 1
Query syntax
CARWave:LV124:E11?
Returns
0|1