ITech IT6512D - System:communicate:serial:baudrate; System:communicate:lan:current:address

SCPI Command Description
Copyright© Itech Electronics Co., Ltd. 19
Returns
NR1
SYSTem:COMMunicate:SERial:BAUDrate
This command is used to set the baudrate of RS232.
Command syntax
SYSTem:COMMunicate:SERial:BAUDrate<4800|9600|19200|38400|57600|11
5200>
Arguments
4800|9600|19200|38400|57600|115200
Example
SYSTem:COMM:SER:BAUD 4800
Query syntax
SYSTem:COMMunicate:SERial:BAUDrate?
Returns
<NR1>
SYSTem:COMMunicate:LAN:CURRent:ADDRess
This command is used to set IP address of power supply.
Command syntax
SYSTem:COMMunicate:LAN:CURRent:ADDRess <STR>
Arguments
<STR>
Unit
None
*RST
192.168.0.200
Example
SYST:COMM:LAN:CURR:ADDR "192.168.0.200"
Query syntax
SYSTem:COMMunicate:LAN:CURRent:ADDRess?
Returns
<STR>