ITech IT6512D - Stb; Sav

IEEE-488 Commands
Copyright© Itech Electronics Co., Ltd. 113
Default set
Refer to *PSC command
Example
*SRE 128
Query syntax
*SRE?
Returns
<NR1>
Related Command
*ESE *ESR? *PSC *STB?
*STB
This command can read the data from status byte register. After execute this
command, the value of bit6 in status byte register will be clean.
Bit
Position
7
6
5
4
3
2
1
0
Condition
OPER
RQS
ESB
MAV
QUES
EAV
Not used
Not Used
The Arguments description in table as follow:
 OPER: Operation status summary
 RQS: Request service
 ESB: Event status summary
 MAV: Message is enabled
 QUES: EQuery status register position.
 EAV: Error message is enabled.
Query syntax
*STB?
Arguments
None
Returns
<NR1>
Related Command
*CLS *ESE *ESR
*SAV
This command can save the current setups of power supply to specified
memory. These setups contains current setups, voltage setups, max voltage